ITEM DESCRIPTION:

ORIGINAL POWER CORD FOR VINTAGE MICKEY MOUSE MOVIE JECKTOR & MOVIE PROJECTOR 30s. NEW OLD STOCK. Here is an unused vintage cloth 6 Foot (I believe, I didn't unravel it) Detachable Power Cord w/ Metal Tension Relief Spring for Vintage Mickey Mouse Talkie Movie Jecktor Projector & Mickey Mouse Projectors that were made in the 1930's. Hole Spacing 11/16 measured from the center of each hole. Compatible Pin Type: 2 Round or Flat Prongs spaced 1/2 to 3/4 apart. UL listed: Yes and has the tag. Max Amps/Volts 5A 250V / 10A 125V. Made by Eagle Co in the 1930's. There may be a hint of rust but, for the most part they are new old stock. THIS DEAL IS FOR ONE CORD ONLY. IMPORTANT: Be sure your machine has 2 pins that are spaced between 1/2 and 11/16 apart - See detailed measurements below. IMPORTANT: Be sure that the Plug End with fit into the Plug Opening on your machine - See detailed measurements below. Detailed Measurements: -1) 2-Hole Plug End Width: 1-1/4 -2) 2-Hole Plug End Height: 17/32 (Just over 1/2) -3) Hole Spacing: Measured from Center To Center: 11/16 -4) Hole Spacing: Measured from Outer edges: 1 -5) Hole Spacing: Measured from Inner edges: Just under 3/8 -6) Hole Diameter: Left to Right: 5/16 -7) Hole Diameter: Top to Bottom: Just under 1/4 This is an original cord, not a replacement that sell for almost $30 each on Ebay. They have been tested using my own Mickey Mouse Movie Jecktor and my Mickey Mouse Projector. If you have one of these without the cord or a beat up cord or a newer replacement you need this to complete these toys. One of these Mickey Mouse projectors sold for $1300 at Morphy's auction house and it had the cord. For that kind of money this is a rather inexpensive way to safely use these projectors as well as completing them with a period cord that is new old stock. I have 6 of them left, found them sealed in an old warehouse 25 years ago. Please note that if you want more than one, 3 of the 6 cords are missing the UL seal, must have fallen off over time. AGAIN, THIS DEAL IS FOR ONE CORD ONLY. Please ask any question that you may have. Thank you, Dave..... No Tax Charged